Plastic closure dropper with a plastic pipette
The material of the plastic closure dropper with a plastic pipette is PP, PVC, and rubber. It is environmentally friendly and odorless.
It is used for essential oil bottles.
The design is very simple and generous. The color can be customized and the design is very light and handy. You can print the graduation on the pipette.
Jiangyin beauty packaging is the professional plastic closure dropper with plastic pipette manufacturer, sell OEM customise plastic dropper, welcome to consult graduated plastic plastic dropper optimal price.
Professional packaging.
Small and convenient.
Easy boarding.
Easy and comfortable.
Recyclable.
Environmental tasteless.
Material: PP
Teat: Rubber and PVC
Glass tube: can be made as per your requirement
Closure:18/400 18/410 18/415 20/400 20/410 22/410 24/410 28/410
Surface: Silk screen printing/graduation mark
USE for: essential oil bottle
MOQ:30000PCS
Price: FOB shanghai $0.15-0.25/pc
Use: essential oil
Make-up packaging.
24-hour Online consultation.
Damage compensation
Jiangyin beauty packaging is the professional plastic dropper manufacturer, buy calibrated plastic dropper at factory price.
Silkscreen printing, hot stamping, matte, frost, offset printing
1. Different categories
Dropper: fat belly dropper and common dropper. Made of rubber nipples and pointed glass tubes.
Rubber head dropper: straight, straight with buffer ball and curved with buffer ball and other forms. The specification of glue head dropper is expressed by the length of the tube, commonly used for 90 mm, 100 mm 2 kinds. The glue head dropper was 0.05ml per drop.
2. Different USES
Dropper: take or add a small amount of reagent, and take the supernatant to separate the precipitate.
Gel-tipped dropper: an instrument used to extract or drip a small amount of liquid reagent.
3. pay attention to different use
Dropper: when adding, the dropper should be perpendicular to the top of the container, avoid tilting, do not stand upside down, do not extend into the inside of the container, do not touch the wall of the container. Except for the absorbing solution, the tip should not touch other utensils to avoid contamination by impurities. Don’t do two things at once.
The ordinary dropper needs to be cleaned after use, while the special dropper cannot be cleaned. The special dropper needs to be put back to the original reagent bottle after use.
When using, don’t just use your thumb and index finger, but your middle and ring fingers.
Glue head dropper: hold the glass with the middle finger and ring finger to maintain stability, squeeze glue head with thumb and index finger to control the inhalation or dropping of reagent. Jiangyin beauty packaging is the professional plastic closure dropper with plastic pipette manufacturer, sell OEM customise plastic dropper, welcome to consult graduated plastic plastic dropper optimal price.
When adding liquid, do not extend into the container, let alone touch the container. It should be suspended vertically at 0.5 cm above the container.
Not upside down or flat on a table. Insert into a clean bottle or tube.
Rinse immediately after use. Do not draw another reagent without cleaning. The dropper does not need to be cleaned.
Glue cap and glass dropper should be tightly combined without air leakage. If the glue cap is aging, it should be replaced in time.
The tip of the gel-tipped dropper is permitted to touch the inner wall of the test tube when a toxic or corrosive liquid is added to the tube.
Glue head dropper is often used with a measuring cylinder.
If the dropper is equipped with a dropper, the dropper is for the purpose of the dropper and cannot absorb other liquids. Do not cross – use or rinse with water.Jiangyin beauty packaging is the professional plastic dropper manufacturer, buy calibrated plastic dropper at factory price.
The plastic dropper is made of PE, pet and other materials, which is an indispensable experimental consumable for laboratory, food research, medicine, and other industries. It has the advantages of low cost and simple use. The specifications are 0.2ml, 0.5ml, 1ml, 3ml, 5ml and 10ml.
1. When using the plastic dropper, pinch the top tightly with your finger to drive out the air in the dropper. Then put the dropper into the reagent bottle, let go of your finger, and the reagent will be inhaled.
2. After taking the solution, the dropper should be kept at the top of the big belly, and should not be placed flat or upside down to prevent solution backflow.
3. When dropping liquid, it should be suspended above the beaker and not touch the wall of the beaker to avoid contamination of the dropper or reagent.
4. Do not put the dropper on the test bench or other places to avoid contamination of the dropper.
5. Rinse the used dropper with clean water immediately for reuse.
6. Do not use an uncleaned dropper to draw another reagent (do not rinse the dropper on the drop bottle with water).
7. Most of the plastic droppers are disposable. If there is a biological risk in the liquid absorbed, the plastic dropper should be thrown into the yellow garbage bag to prevent laboratory pollution.
Jiangyin beauty packaging is the professional plastic closure dropper with plastic pipette manufacturer, sell OEM customise plastic dropper, welcome to consult graduated plastic plastic dropper optimal price.
